- – Excellent optical mode, long operating life, up to 100,000 HS
- – The highest electro-optical conversion efficiency, up to 80%, but gross power less than 600W
- – Small size, steady, without maintenance, easy to operate
- – High precision, suited for fine processing on all metal and some non-metal.
- – This machine adapts the fiber laser and has high electro- optical conversion rate, the quality of laser beam is good, cooling with air- cooling methods, it has smaller shape, low power and much more energy-efficient.
- – Metals (including rare metals), engineering plastics, electroplating materials, coating materials, coating materials, plastics, rubber, epoxy resin, ceramic, plastic, ABS, PVC, PES, steel, titanium, copper and other materials.
|Laser Power||20W (Raycus)||30W 50W|
|Marking Range||100*100mm/200*200mm||70*70mm /300*300mm|
|Minimum Line Width||0.02mm|
|Marking Depth||0 ~0.15mm|
|Engraving Line Speed||≤7000mm/s|
|Graphic Format Supported||bmp,jpg,gif,tga,png,tif,ai,dxf,dst,plt,etc.|
|Use of the Environment||Clean and Dust Free or Dust less|
|Working Condition:Humidity||5%-75%,Free of Condensed Water|
|Laser Module Life||>100000 hours|
|Optional parts||Up and down table|
|Full enclosed structure|